10 Sections
201 Lessons
10 Weeks
Expand all sections
Collapse all sections
1: SOLAR RADIATION PHYSICS & OPTICS
Objective: Understand the physical nature of solar radiation, its measurement, modeling, and optical interaction with semiconductor materials
26
1.1
Module 1.1: Solar Structure and PhysicsCopy
1.2
Module 1.2: Solar Electromagnetic RadiationCopy
1.3
Module 1.3: Solar Geometry and AstronomyCopy
1.4
Module 1.4: Atmosphere-Radiation InteractionCopy
1.5
Deliverable: Calculate terrestrial solar spectrum for a given location using a simplified atmospheric modelCopy
1.6
Module 2.1: Solar Radiation MeasurementCopy
1.7
Module 2.2: Solar Resource Databases and ModelsCopy
1.8
Module 2.3: Solar Radiation StatisticsCopy
1.9
Module 2.4: Radiative Transfer ModelsCopy
1.10
Deliverable: Statistical analysis of radiation time series data and solar resource modeling for a specific siteCopy
1.11
Module 3.1: Geometric and Wave OpticsCopy
1.12
Module 3.2: Light-Semiconductor InteractionCopy
1.13
Module 3.3: Light Trapping TechniquesCopy
1.14
Module 3.4: Antireflection and Optical LayersCopy
1.15
Deliverable: Design of a multilayer antireflection structure and simulation of light trapping in silicon cellCopy
1.16
Module 4.1: Photovoltaic Conversion ThermodynamicsCopy
1.17
Module 4.2: Concepts for Single-Gap Limit ExceedanceCopy
1.18
Module 4.3: Unconventional OpticsCopy
1.19
Module 4.4: Energy Balance and TemperatureCopy
1.20
Deliverable: Calculate maximum theoretical efficiency for different bandgaps and analyze losses in real cellCopy
1.21
Module 5.1: Spectroradiometry and CalibrationCopy
1.22
Module 5.2: Advanced Characterization TechniquesCopy
1.23
Module 5.3: Spectral Response MeasurementsCopy
1.24
Module 5.4: International Standards and NormsCopy
1.25
Deliverable: Establish complete EQE measurement protocol with uncertainty analysis for given cell technologyCopy
1.26
QCM- 1Copy
0 Questions
2: SEMICONDUCTOR PHYSICS
Objective: Master quantum, statistical, and transport physics of charge carriers in semiconductors for photovoltaic conversion
26
2.1
Module 6.1: Energy Band TheoryCopy
2.2
Module 6.2: Semiconductor StatisticsCopy
2.3
Module 6.3: Doped SemiconductorsCopy
2.4
Module 6.4: Heterostructures and AlloysCopy
2.5
Deliverable: Calculate simplified band structure and carrier concentrations for different doping levels and temperaturesCopy
2.6
Module 7.1: Diffusion and Drift MechanismsCopy
2.7
Module 7.2: Carrier Scattering MechanismsCopy
2.8
Module 7.3: Carrier Generation and RecombinationCopy
2.9
Module 7.4: Excess Carriers and Transient PhenomenaCopy
2.10
Deliverable: Model carrier transport in solar cell base with calculation of diffusion and drift currentsCopy
2.11
Module 8.1: Thermodynamic Equilibrium of PN JunctionCopy
2.12
Module 8.2: PN Junction Out of EquilibriumCopy
2.13
Module 8.3: Heterojunctions and ContactsCopy
2.14
Module 8.4: Advanced Junction StructuresCopy
2.15
Deliverable: Complete calculation of J-V characteristics for ideal PN junction and analysis of current-limiting mechanismsCopy
2.16
Module 9.1: Surface States and TrappingCopy
2.17
Module 9.2: Surface Field EffectCopy
2.18
Module 9.3: Metal-Semiconductor and MOS InterfacesCopy
2.19
Module 9.4: Advanced Passivation and ConceptsCopy
2.20
Deliverable: Comparative analysis of surface passivation mechanisms for different cell technologies and surface recombination velocity optimizationCopy
2.21
Module 10.1: Perovskites and Hybrid MaterialsCopy
2.22
Module 10.2: Organic SemiconductorsCopy
2.23
Module 10.3: 2D and Emerging MaterialsCopy
2.24
Module 10.4: Advanced Transport ConceptsCopy
2.25
Deliverable: Critical evaluation of transport and recombination properties in emerging materials (perovskites, organics) vs crystalline siliconCopy
2.26
QCM- 2Copy
0 Questions
3: CRYSTALLINE SILICON CELL TECHNOLOGY
Objective: Master manufacturing processes, device engineering, and optimization of crystalline silicon cells
26
3.1
Module 11.1: Solar Grade Silicon MetallurgyCopy
3.2
Module 11.2: Czochralski (CZ) Monocrystalline GrowthCopy
3.3
Module 11.3: Multicrystalline (mc-Si) GrowthCopy
3.4
Module 11.4: Wafer Cutting and PreparationCopy
3.5
Deliverable: Analysis of crystalline defects and their impact on minority carrier lifetime in different silicon substrate typesCopy
3.6
Module 12.1: Chemical Surface TexturingCopy
3.7
Module 12.2: Cleaning and Surface PreparationCopy
3.8
Module 12.3: Dopant DiffusionCopy
3.9
Module 12.4: Diffusion Control and CharacterizationCopy
3.10
Deliverable: Optimize diffusion process to achieve target doping profile with target Rs and controlled junction depthCopy
3.11
Module 13.1: Thermal Oxidation and PassivationCopy
3.12
Module 13.2: Advanced Passivation TechniquesCopy
3.13
Module 13.3: Screen Printing MetallizationCopy
3.14
Module 13.4: Advanced Metallization and AlternativesCopy
3.15
Deliverable: Design passivation and metallization stack to minimize recombination and series resistance lossesCopy
3.16
Module 14.1: PERC Cells (Passivated Emitter and Rear Cell)Copy
3.17
Module 14.2: TOPCon Cells (Tunnel Oxide Passivated Contact)Copy
3.18
Module 14.3: HJT Cells (Heterojunction)Copy
3.19
Module 14.4: Back Contact Cells (IBC, MWT)Copy
3.20
Deliverable: Techno-economic comparison of advanced cell architectures and technology roadmapCopy
3.21
Module 15.1: J-V Measurements Under IlluminationCopy
3.22
Module 15.2: Advanced Characterization TechniquesCopy
3.23
Module 15.3: Loss Analysis and LimitsCopy
3.24
Module 15.4: Stability and AgingCopy
3.25
Deliverable: Complete loss analysis of commercial cell and improvement levers proposal with potential gain estimationCopy
3.26
QCM- 3Copy
0 Questions
4: THIN-FILM & EMERGING TECHNOLOGIES
26
4.1
Module 16.1: CdTe Properties and Band StructureCopy
4.2
Module 16.2: CdTe Deposition ProcessesCopy
4.3
Module 16.3: Post-Deposition Treatments and ContactsCopy
4.4
Module 16.4: Performance and IndustrializationCopy
4.5
Deliverable: Analysis of recombination mechanisms in CdTe cells and absorber thickness optimizationCopy
4.6
Module 17.1: Hydrogenated Amorphous Silicon (a-Si:H)Copy
4.7
Module 17.2: Microcrystalline Silicon (μc-Si:H, nc-Si:H)Copy
4.8
Module 17.3: PECVD Deposition ProcessesCopy
4.9
Module 17.4: Tandem and Multi-Junction CellsCopy
4.10
Deliverable: Simulation of a-Si:H/μc-Si:H tandem cell with thickness optimization for current matchingCopy
4.11
Module 18.1: Perovskite Chemistry and CrystallographyCopy
4.12
Module 18.2: Manufacturing ProcessesCopy
4.13
Module 18.3: Device Physics and PerformanceCopy
4.14
Module 18.4: Stability and Lead-Free MaterialsCopy
4.15
Deliverable: Analysis of degradation mechanisms and encapsulation strategy proposal for 25-year lifetime assuranceCopy
4.16
Module 19.1: Organic Photovoltaics (OPV)Copy
4.17
Module 19.2: Dye-Sensitized Solar Cells (DSSC)Copy
4.18
Module 19.3: Quantum Dot and Nanostructure CellsCopy
4.19
Module 19.4: Emerging Concepts and New ApproachesCopy
4.20
Deliverable: Comparative evaluation of emerging technologies by efficiency, stability, cost, and applicability criteriaCopy
4.21
Module 20.1: Technology Comparative AnalysisCopy
4.22
Module 20.2: Materials Selection and EngineeringCopy
4.23
Module 20.3: System Integration and Specific ApplicationsCopy
4.24
Module 20.4: Technology Roadmap and ProspectsCopy
4.25
Deliverable: Multi-criteria decision matrix for PV technology selection according to application context (utility, residential, BIPV, space)Copy
4.26
QCM- 4Copy
0 Questions
5: ELECTRICAL MODELING OF PV GENERATORS
Objective: Develop mathematical, electrical, and numerical models for simulation and optimization of PV generators
26
5.1
Module 21.1: One-Diode ModelCopy
5.2
Module 21.2: Two-Diode ModelCopy
5.3
Module 21.3: Advanced Models and Secondary EffectsCopy
5.4
Module 21.4: Parameter Extraction and FittingCopy
5.5
Deliverable: Complete extraction of 5 one-diode model parameters from experimental J-V curve and model validationCopy
5.6
Module 22.1: Cell Series and Parallel AssociationCopy
5.7
Module 22.2: Module Electrical ModelsCopy
5.8
Module 22.3: Shading and Mismatch EffectsCopy
5.9
Module 22.4: Module Characterization and MeasurementsCopy
5.10
Deliverable: Simulation of module under partial shading with loss analysis and bypass diode placement optimizationCopy
5.11
Module 23.1: I-V Translation ModelsCopy
5.12
Module 23.2: Cell Temperature ModelsCopy
5.13
Module 23.3: Energy Performance ModelsCopy
5.14
Module 23.4: Energy Production SimulationCopy
5.15
Deliverable: Energy performance model for specific module with annual production estimation for given siteCopy
5.16
Module 24.1: Device SimulationCopy
5.17
Module 24.2: 2D/3D Modeling and Edge EffectsCopy
5.18
Module 24.3: PV System ModelingCopy
5.19
Module 24.4: Optimization and Machine LearningCopy
5.20
Deliverable: TCAD simulation of solar cell with band, concentration, and current profile analysis, comparison with analytical modelCopy
5.21
Module 25.1: Electrical Loss DecompositionCopy
5.22
Module 25.2: System Loss AnalysisCopy
5.23
Module 25.3: Optimization MethodsCopy
5.24
Module 25.4: Monitoring and Performance AnalysisCopy
5.25
Deliverable: Complete loss analysis of real PV installation with corrective action proposals and gain estimationCopy
5.26
QCM- 5Copy
0 Questions
6: MODULE PHYSICS AND ENCAPSULATION
Objective: Understand module engineering, encapsulation materials, reliability, and degradation mechanisms
26
6.1
Module 26.1: Module Structure and ComponentsCopy
6.2
Module 26.2: Module Electrical DesignCopy
6.3
Module 26.3: Frameless and Integration ModulesCopy
6.4
Module 26.4: Module Standards and CertificationCopy
6.5
Deliverable: Detailed design of bifacial glass-glass module with thermomechanical stress calculation and interconnector optimizationCopy
6.6
Module 27.1: Encapsulation PolymersCopy
6.7
Module 27.2: Encapsulant Optical PropertiesCopy
6.8
Module 27.3: Adhesion and Mechanical DurabilityCopy
6.9
Module 27.4: Backsheets and SubstratesCopy
6.10
Deliverable: Selection and justification of encapsulation materials for module destined for specific environment (desert, tropical, maritime)Copy
6.11
Module 28.1: Cell Degradation MechanismsCopy
6.12
Module 28.2: Encapsulant and Interface FailuresCopy
6.13
Module 28.3: Electrical and Mechanical FailuresCopy
6.14
Module 28.4: Accelerated Reliability TestingCopy
6.15
Deliverable: Analysis of potential failure modes for module and definition of accelerated qualification test planCopy
6.16
Module 29.1: Thermomechanical Stresses in ModulesCopy
6.17
Module 29.2: Mechanical Behavior Under LoadCopy
6.18
Module 29.3: Design for Reliability (DfR)Copy
6.19
Module 29.4: Recycling and End of LifeCopy
6.20
Deliverable: Thermomechanical simulation of module with maximum stress analysis and structural improvement proposalsCopy
6.21
Module 30.1: Encapsulation for Tandem and Emerging CellsCopy
6.22
Module 30.2: Advanced Bifacial ModulesCopy
6.23
Module 30.3: Agrivoltaic and Floating ModulesCopy
6.24
Module 30.4: Next-Generation ModulesCopy
6.25
Deliverable: Design of bifacial module for agrivoltaic application with production gain estimation and crop impact analysisCopy
6.26
QCM- 6Copy
0 Questions
7: POWER ELECTRONICS FOR PHOTOVOLTAICS
Objective: Master static converters, inverters, and power electronics dedicated to PV systems
26
7.1
Module 31.1: Power Semiconductor ComponentsCopy
7.2
Module 31.2: Wide Bandgap (WBG) ComponentsCopy
7.3
Module 31.3: Magnetic Circuits and CapacitorsCopy
7.4
Module 31.4: Cooling and Thermal ManagementCopy
7.5
Deliverable: Selection and sizing of semiconductor and passive components for specific PV converter with loss and cooling calculationsCopy
7.6
Module 32.1: Fundamental Choppers (DC-DC Converters)Copy
7.7
Module 32.2: Converters for Maximum Power Point Tracking (MPPT)Copy
7.8
Module 32.3: Conversion ArchitecturesCopy
7.9
Module 32.4: Efficiency and OptimizationCopy
7.10
Deliverable: Design of Boost converter for MPPT with component calculations, efficiency estimation, and operation simulationCopy
7.11
Module 33.1: Inverter PrinciplesCopy
7.12
Module 33.2: Control and Grid ConnectionCopy
7.13
Module 33.3: Power Quality and HarmonicsCopy
7.14
Module 33.4: Protection and SafetyCopy
7.15
Deliverable: Design of single-phase inverter control system with PWM modulation simulation and harmonic analysisCopy
7.16
Module 34.1: Multilevel InvertersCopy
7.17
Module 34.2: Transformerless InvertersCopy
7.18
Module 34.3: Storage and Hybrid InvertersCopy
7.19
Module 34.4: Trends and New ArchitecturesCopy
7.20
Deliverable: Comparison of transformerless inverter topologies with leakage current analysis and solution proposal for residential buildingCopy
7.21
Module 35.1: Classical MPPT AlgorithmsCopy
7.22
Module 35.2: Advanced MPPT and OptimizationsCopy
7.23
Module 35.3: Grid Constraint ManagementCopy
7.24
Module 35.4: Inverter Monitoring and DiagnosticsCopy
7.25
Deliverable: Implementation of IncCond MPPT algorithm with partial shading condition management and simulation validationCopy
7.26
QCM- 7Copy
8: DC AND AC CABLING & ELECTRICAL PROTECTION
Objective: Size and secure DC and AC electrical networks for PV installations according to international standards
26
8.1
Module 36.1: PV DC CablesCopy
8.2
Module 36.2: DC Circuit SizingCopy
8.3
Module 36.3: Junction Boxes and DC ProtectionCopy
8.4
Module 36.4: DC Cable Design and InstallationCopy
8.5
Deliverable: Complete DC cabling sizing for 1 MWp PV plant with cross-section calculations, protection, and loss estimationCopy
8.6
Module 37.1: DC Overcurrent ProtectionCopy
8.7
Module 37.2: Overvoltage ProtectionCopy
8.8
Module 37.3: Arc Fault Detection (AFCI)Copy
8.9
Module 37.4: Grounding and Equipotential BondingCopy
8.10
Deliverable: Design of complete DC electrical protection system for residential installation with protection selectivity and surge arrester coordinationCopy
8.11
Module 38.1: AC Cabling and SizingCopy
8.12
Module 38.2: Delivery Points and MeteringCopy
8.13
Module 38.3: Transformers and Delivery SubstationsCopy
8.14
Module 38.4: Power Quality and DisturbancesCopy
8.15
Deliverable: Sizing of AC connection for 5 MWp plant with MV/LV transformer and power quality analysisCopy
8.16
Module 39.1: IEC Standards for PhotovoltaicsCopy
8.17
Module 39.2: American and Other Regional StandardsCopy
8.18
Module 39.3: Building and Fire CodesCopy
8.19
Module 39.4: Documentation and ComplianceCopy
8.20
Deliverable: Establishment of compliance checklist for international PV installation with reference to applicable standardsCopy
8.21
Module 40.1: Electrical Risks in PV InstallationsCopy
8.22
Module 40.2: Safety Devices and DisconnectionCopy
8.23
Module 40.3: Personnel ProtectionCopy
8.24
Module 40.4: Fire Safety and AccessCopy
8.25
Deliverable: Development of electrical safety plan for large PV plant with emergency intervention procedures and protection equipmentCopy
8.26
QCM- 8Copy
0 Questions
9: MECHANICAL STRUCTURES AND BUILDING INTEGRATION
Objective: Design support structures, mounting systems, and architectural integration of PV systems
26
9.1
Module 41.1: Actions on StructuresCopy
9.2
Module 41.2: Steel Structure CalculationCopy
9.3
Module 41.3: Ground-Mounted StructuresCopy
9.4
Module 41.4: Roof-Mounted StructuresCopy
9.5
Deliverable: Structure calculation for ground-mounted PV field with ULS and SLS verification under wind and snow loads per EurocodesCopy
9.6
Module 42.1: Profiles and Mounting RailsCopy
9.7
Module 42.2: Fixing on Metal RoofsCopy
9.8
Module 42.3: Fixing on Tile and Slate RoofsCopy
9.9
Module 42.4: Special Fixing SystemsCopy
9.10
Deliverable: Detailed design of fixing system for tile roof with principle diagram and material listCopy
9.11
Module 43.1: Tracker Principles and TypesCopy
9.12
Module 43.2: Tracker Mechanics and DriveCopy
9.13
Module 43.3: Tracker Control and Power SupplyCopy
9.14
Module 43.4: Optimization and MaintenanceCopy
9.15
Deliverable: Calculation of annual energy gain for horizontal single-axis tracker for given location with backtracking optimizationCopy
9.16
Module 44.1: BIPV Concepts and AdvantagesCopy
9.17
Module 44.2: BIPV Roof ElementsCopy
9.18
Module 44.3: BIPV Facade and Glazing ElementsCopy
9.19
Module 44.4: BIPV Design and StandardsCopy
9.20
Deliverable: Design of BIPV facade with thermal and energy performance calculations, adapted module selectionCopy
9.21
Module 45.1: Agrivoltaics PrinciplesCopy
9.22
Module 45.2: Agrivoltaic System DesignCopy
9.23
Module 45.3: Floating Applications (FPV)Copy
9.24
Module 45.4: Other Integrated ApplicationsCopy
9.25
Deliverable: Feasibility study of agrivoltaic project with agricultural, energy, and economic impact analysisCopy
9.26
QCM- 9Copy
0 Questions
10: SYSTEM INTEGRATION AND GLOBAL OPTIMIZATION
Objective: Synthesize all knowledge for systemic optimization of PV installations
26
10.1
Module 46.1: Sizing MethodsCopy
10.2
Module 46.2: Conversion Ratio OptimizationCopy
10.3
Module 46.3: Layout OptimizationCopy
10.4
Module 46.4: Sensitivity and Uncertainty AnalysisCopy
10.5
Deliverable: Optimized sizing of 10 MWp PV plant with LCOE sensitivity analysis to main parametersCopy
10.6
Module 47.1: Cost Analysis (CAPEX)Copy
10.7
Module 47.2: Revenue and OPEX AnalysisCopy
10.8
Module 47.3: Economic IndicatorsCopy
10.9
Module 47.4: Financing and Business ModelsCopy
10.10
Deliverable: Complete business plan for residential PV project and large PV plant with LCOE and profitability calculationCopy
10.11
Module 48.1: Electrochemical Storage TechnologiesCopy
10.12
Module 48.2: Storage Strategies and Energy ManagementCopy
10.13
Module 48.3: Electrical Grid IntegrationCopy
10.14
Module 48.4: Microgrids and Off-Grid SitesCopy
10.15
Deliverable: Design of hybrid PV + battery + grid system for self-consumption maximization with optimized control strategyCopy
10.16
Module 49.1: Quality Assurance in Construction PhaseCopy
10.17
Module 49.2: Monitoring and Surveillance SystemsCopy
10.18
Module 49.3: Preventive and Corrective MaintenanceCopy
10.19
Module 49.4: Recycling and End of LifeCopy
10.20
Deliverable: Establishment of preventive maintenance plan for 50 KWp PV plant with intervention frequencies and cost estimationCopy
10.21
Module 50.1: Fundamental Knowledge IntegrationCopy
10.22
Module 50.2: Trends and InnovationsCopy
10.23
Module 50.3: Environmental and Societal ChallengesCopy
10.24
Module 50.4: Assessment and CertificationCopy
10.25
Final Deliverable: Personal synthesis memoir integrating all studied concepts, proposal for innovative PV installation, and professional application roadmapCopy
10.26
QCM- 10Copy
0 Questions
PHOTOVOLTAIC CARPORT CANOPIES
Search
This content is protected, please
login
and enroll in the course to view this content!
Home
Cours
Cart
Account
Login with your site account
Lost your password?
Remember Me
Not a member yet?
Register now
Register a new account
Are you a member?
Login now
Modal title
Main Content